The interlocking floor tiles rubber cover can live backyard decks faded and some products have sturdy rubber covered surfaces to fading caused by ultraviolet light. However, rubber materials will not help a deck that is not structurally sound. For best results, repair loose boards, exposed nails and other defects before covering a cover with rubber intertwined.
The materials of the rubber cover interlocking floor tiles often come in terracotta, gray and brown that mimic clay, stone and tile or brick pavers. The black, blue, green and other colors, allow owners to create geometric designs on covers that resemble linoleum floors interior. Many products rubber covers are friendly to the environment because they are made of recycled rubber and polyvinyl chloride (PVC). The rubber cover interlock is usually easy to install for the owners and their slip resistance prevents injuries from falls.
6 Photos Gallery of: Materials Locking Interlocking Floor Tiles Rubber Cover
- Facilities with glue and hooks
Some tiles need interlaced rubber adhesive to remain in place. A product made by Subsurface has overlapping edges which are glued together so that the tiles rubber remain connected to each other without being attached to the cover. Rubber covers Environmental Molding Concepts not require an adhesive for installation because pins on the sides of the tiles alternate slide in the holes in the tiles adjacent to hold the cover in place. Install tiles without adhesive rubber allows owners to replace damaged or worn sections without removing the entire cover.
- Cover puzzle pieces
The rubber cover can fit like pieces of a puzzle, as do the Eco-flex interlocking floor tiles mats Keystone. This cover is shaped so that the mats 37 inches (93.98 cm) square are intertwined in the four sides, making it unnecessary to glue in place. However, you must install the mats on a terrace level with a smooth surface so that the edges fit perfectly and pins or glue does not hold in place.
There are many types of interlocking floor tiles rubber on the market, it is important to choose a product that is designed for use on outdoor decks to avoid drainage problems. The rubber cover is generally porous so that rain and melting snow to flow through. The tiles rubber on the back grooves also help to drain as the water and air can flow freely through the slots to prevent moisture entrapment and stimulate the growth of mold. Wooden decks with tiles rubber can rot if the tiles do not allow sufficient drainage. The cover interlock can be expensive, ranging from about $ 5 to $ 14 per foot (30.48 cm) square, starting in 2011. The tiles thicker rubber in popular colors tends to cost more.