Manufactures a Monitor delta shower faucet for the bathroom which has varying degrees of maximum hot water output series. This type of tap is also known as a tap because the maximum scalding hot temperature is adjustable by homeowners. Lowering the temperature of hot water saves young children and the elderly to open only the hot water and accidentally burn them.
Line Delta Monitor shower taps usually comes with a single handle that controls the flow of water both hot and cold. Delta designed the Monitor line with a system scald, which can be adjusted so that the water is not hot too. Repair losses Monitor delta shower faucet plastic piece replacing the cartridge in the water line, as the cartridge is the tap part is damaged with time.
6 Photos Gallery of: How To Fix Losses Monitor Delta Shower Faucet
- Closes the stream of water to the shower valve closing the access panel in the wall behind the shower faucet or closing the main valve in the house. Turn the shower faucet to drain any water that is in the pipes and then close it again.
- Remove the screw that holds the water control handle in place using a Phillips screwdriver or Allen wrench. Screw located under the cover plastic in the middle of the handle or recessed in a small area at the base of the handle.
- Fold chrome strip that covers the valve cartridge, turning left and right if you get stuck. Use tweezers to remove the nut that is in the middle of the faucet mount, placing the nut in a safe place.
- Pull the cartridge valve pipe broke. If the cartridge when you throw your fingers does not move, put a small flathead screwdriver between the edge of the cartridge and the pipe to remove.
5. Slide the new cartridge into the pipe, aligning the tabs on the cartridge with the notches in the pipe. Replace tap elsewhere in the order in which you removed and then reopen the delta shower faucet water.